Knowledge Area

2010 Aprilia MXV 450

All design solutions without compromising on 450 MXV have been determined by the need to achieve the highest level of performance while extending the use of bicycles. Chair-down exhaust pipe, for example, featured a brand new road for better performance with more torque, motocross at low revs. Valve gear based on the single overhead cam and four titanium valves per cylinder gives the best compromise between a compact, lightweight and performance.
Thanks to advanced technology, highly civilized and the 45.2 engine still running even in the motocross version, and in accordance with FIM regulations easier for the emission of noise (94 dB threshold).
The MXV 450 affords beautifully easy access for maintenance (plugs, oil filters, air filters), and has extended maintenance intervals, far above average. This engine has a dry flood lubrication system with oil tank is integrated in the crankcase. Elimination of external oil tank and pipes that connect has caused a further decline in body weight.
Starter motor has been eliminated for the same reason. Getting started is to kick-start only to lose weight.
The important specifications of the engine in MXV 45.2 new:
* Electronic fuel injection.
* Dry Flood lubrication with oil tank integrated inside the crankcase. Separate lubrication for gearbox and engine to keep the oil for longer efficient.
* Single overhead cam, titanium valves.
* Single-piece crankshaft.
Cylinder * integrated in crankcase, wet liners.
* Options “Big Bang” and “Screamer” ignition settings.
* “Hard / soft” mapping is selected from the handlebars.
Stepper Motor Electronics * idling control.
* Engine maximum speed 12 500 rpm.

Aprilia MXV 450 red

CHASSIS: LIGHTER THAN EVER
Dimensional framework has been optimized to limit the use of motocross, and the whole framework has been developed to complement the engine. design is unique among frame motocross. A tubular steel trellis is interference fitted to pressed aluminum side plates to form a single structure. This machine is also an integral part of the chassis, acting as load-bearing elements and contributing to exceptional overall rigidity.
Particular care has been taken over the distribution of weight. Weight has been centralized as far as possible to enhance the agility in all conditions.
Weight (one of the most important aspect of any bicycle motocross) is central to design every part of the MXV, from the brake disc to the frame.
This suspension has been designed for lightweight and maximum elasticity and combines hydroformed members. The system offers improved linkage is damped by an adjustable Sachs monoshock fully race with two damping settings for high and low speed ride.
Side down Marzocchi fork has 50 mm cage and also calibrated for motocross. fork is fully customizable, so you can set their own suspension action exactly as you want.
The fuel tank has been redesigned to keep the bike’s center of gravity as close as possible to the physical center of the machine. Attention has also been given to remove the parts that stand out to reduce the width and improve ergonomics.
Centralization is also heavily influenced the design of a filter box. Filter is now located at the front of the bike, leaving the fuel tank more room to extend the rear shock absorber.
Grid filters also play a throttle body filter and facilitate change.
ECU and all electrical system components are also stored securely in a box filter.
Exhaust system, silencer under the seat and twin tail pipes made entirely of titanium (pipes and silencers).
Batteryless minimal electrical systems, and fully integrated in the filter box. Machinery and electrical systems so as to form a single block.
The two-tone seat helps the rider stepped maintain its position at any time.

Brakes
Technology unparalleled performance and chassis supported by a fantastic braking system. The MXV equipped with Nissin floating caliper and super-lightweight wavy discs (270 mm at the front), for unparalleled braking control in even the most challenging conditions.
A 240 mm rear disc with Nissin single piston caliper provide the perfect balance between strength and ease of braking control.

Aprilia MXV 450 from top

SPECIFICATIONS

• Engine: 77° V twin four stroke. Liquid cooled. Single overhead cam with rocker operated exhaust valves, chain timing drive, 4 valve heads, titanium valves.
• Fuel: Lead-free petrol.
• Bore x Stroke: 76 x 49.5 mm
• Total displacement: 449 cm3
• Compression ratio: 13 :1
• Fuel system: Integrated engine management system controlling ignition and fuel injection. Throttle body: 38 mm. Hard and soft mappings selectable from the handlebars.
• Ignition: Electronic digital (batteryless).
• Starting: Kick-start.
• Exhaust: Conforming to FIM standards for 2009.
• Generator: 220 W
• Lubrification: Dry sump. Separate gearbox lubrication.
• Gear box: 4 speed. Motocross gear ratios: 1st 14/29 2nd 15/26 3rd 17/25 4th 19/24
• Clutch: Multi-plate in oil bath, cable operated.
• Primary drive: Spur gears. Transmission ratio: 23/65.
• Final drive: Chain. Transmission ratio: 14/49.
• Frame: Cr-Mo steel perimeter frame with aluminium alloy vertical members. Headstock rake angle 26.2°. Lightweight rear frame section.
• Front suspension: 50 mm Marzocchi upside down fork with adjustments for compression and rebound.
• Rear suspension: Pro-Link with Sachs monoshock, adjustable in compression and rebound.
• Brakes: Front: 270 mm lightweight stainless steel floating disc with Nissin floating caliper. Rear: 240 mm lightweight stainless steel disc with Nissin floating caliper.
• Wheels: Black anodised aluminium alloy. Front: 1.60 x 21”. Rear: 2.15 x 19″.
• Tyres: Front: Dunlop 80/100-21 51M. Rear: Dunlop 110/90-19 62M.
• Dimensions: Overall length: 2,190 mm Overall width: 815 mm Ground clearance: 1,285 mm Seat height: 960 mm Wheelbase: 1,499 mm
• Fuel tank capacity: Capacity 7.4 litres.

2010 Aprilia MXV exhaust

SHIVER 750 ABS Aprilia Black

Introduced in 2007, Aprilia shiver 750 gained instant recognition from the media and public motorcycles for unique characteristics. Here are naked we all been waiting for. From everyday use to travel all over the mountain, or used on a horse race, a 750 Aprilia shiver truly at home in any situation, guaranteeing pure riding pleasure at all times.
Lightweight, agile and strong, has the latest generation machines and the most advanced technical features in its class. V2 90 ° is produced entirely in-house by Aprilia is very compact. Above all, thanks to a sophisticated electronic management, can provide the level of power comparable to four cylinder engines in the same class, but with much better torque at low revs for an efficient and pleasant even on everyday routes. In accordance with the tradition of Aprilia, the chassis simply has no rivals in its class. Mixed steel trellis frame and aluminum side plates provide rigidity default settings. All this makes the bike extremely compact and the perfect trip for beginners and experts together.
Light from Aprilia shiver 750 also meets the most ingenious motorcyclists. Its maneuverability and engine performance enable the bike to accompany its owner from the first few meters on two wheels through the maturity date of a complete motorcycle.
The main characteristics of shivering Aprilia 750 are:
• 90 ° V2 engine with four valves per cylinder, double overhead camshaft and liquid cooling
• Ride-by-wire electronic throttle technology with three different mappings (Sport, Touring and Rain);
• Electronic fuel injection injectors with the latest generation;
• Mixed gear and chain valve timing;
• steel trellis frame and aluminum side plates for Modular high torsional rigidity;
• Aluminum Suspension with a framework for strengthening and lateral shock absorber;
• 43 mm inverted fork;
• Racing radial brake caliper on the front;
• latest generation two channel ABS (ABS version only)

THE DESIGN: SHAPE ON POWER SERVICE
As with all Aprilia products, which shivered 750 has a highly innovative design where form and function come together to create an object is almost perfect. The shivering Aprilia 750 is a pure technology as is evident from his intent, aggressive lines.
Each element has been designed to be not only beautiful but also functional. Design is subtle but at the same time neat, without too many frills for the maximum possible function. In shivering, Aprilia 750 technical component becomes a design element at the same time, creating a bike both aggressive and elegant at the same time. New color schemes for the year 2009 was the icing on cake.
Assembly of tank-seat-tail bike emphasizes compactness. rider becomes one with the machine, perfectly integrated within a short bike, agile, and sporty. Extremely elongated tail also incorporates twin exhausts with triangular silencers, a feature that makes the design even more aggressive, while keeping weight distribution highly symmetrical.
Adoption side shock absorber not just adds further distinctive feature to display a bicycle, but also allows a, rational and effective compact exhaust system to be installed.

2010 Aprilia SHIVER 750 ABS Silver

THE V90 ENGINE: TECHNOLOGY IN THE PURE STATE
V90 engine inherits all Aprilia experience in high performance mechanics. Thanks to the particular characteristics of technical, Aprilia V90 combines high specific power with maximum usability, and easy to ride.

This low-cost twin-cylinder powerplant is destined to set new standards in performance and technology for medium powered bikes.
Searching for top-class performance in the application of a number of technically advanced and innovative features:
• 90 ° V engine layout;
• Ride-by-wire technology with three mappings (Sport, Touring e Rain);
• Highly over-square bore and stroke ratio;
• Four valves per cylinder;
• Double overhead camshaft with mixed chain and gear drives;
• Electronic fuel injection with two throttle bodies;
• Plug caps with integrated stick-rolls;
• Three way catalytic converter and Lambda probe, oxygen sensor;
• Hydraulic-operated clutch;

For this type of bike, with a 90 ° V arrangement of cylinders was found to be the best solution in terms of performance and size. With low torque consistently available in a variety of revs and negligible vibrations, Aprilia V2 750 is full and strong at the top of his class.
The shivering Aprilia 750 is the first production motorcycle equipped with integral throttle control ride-by-wire electronics. Thanks to this advanced system, Aprilia V90 engine provides exceptional power output to size and configuration. Maximum power 95 HP at 9000 rpm and maximum torque of 81 Nm at 7000 rpm extraordinary numbers for this displacement engine. Impressive torque, already available at low revs, making up 750 shivering in the streets of the country an exceptional experience. And this is precisely where the ride-by-wire comes into play. Trust Aprilia engineers to be the first to apply this technology to the naked! Ride-by-wire power filter cheerfully and V twin engine torque to provide the best performance and control for all riders and all road conditions. Mapping Exercise gives you all the sporty, aggressive power Aprilia V twin. Touring offers a smoother and more relaxing trip for those times when the maximum power can be abandoned for a pleasant trip or travel with a passenger. Finally, Rain reduces torque by 25% to avoid the risk of wheel slip on the slippery surface.

THE FRAME: rationality and EFFICIENCY
The experts always acknowledged that Aprilia bikes have the best chassis in their class. The shivering Aprilia 750 is concrete confirmation that once again Aprilia has succeeded in creating a good chassis is very easy and very intuitive and performance high.
design solutions related to the twin 90 ° V trellis leading to the development of rational and reliable mix of steel frames and aluminum side plates.
Reducing the longitudinal dimension makes it possible to get a bike engine, short-agile, aided by a particular side positioning of the shock absorber. This is not a simple cosmetic mannerism, but the right technical decisions, designed to free up space needed to provide optimal dimensions of the exhaust.
The suspension of aluminum with reinforcement truss has been sized specifically to support the asymmetrical stresses caused by lateral position of shock absorber. Stiffness of the suspension sets a new standard for the class.

2010 Aprilia SHIVER 750 ABS Black

SUSPENSION
Side down fork with 43 mm prosthesis to support the radial calipers provides benchmark smoothness. 120 mm wheel travel makes the bike together at home on the city and mountain routes. Bottom steering yoke is made of aluminum forged, like the yoke on the rudder too.
The side shock absorber rests directly on suspension, according to the cantilever principle, and provides adjustments for spring preload and hydraulic rebound. Rear wheel travel is 130 mm.

Brakes
Best technology currently available is incorporated in the shivering, Aprilia 750 junior high powered naked with a radial caliper system, a feature further emphasizes (as if it were needed) personality sporty design. The 320 mm front discs are the same as that used in the racing flagships, the RSV 1000 R and Tuono 1000 R.
At the rear, 245 mm disc with single piston caliper provides adequate backup for the next series.
The front and rear braking circuits both use aeronautical having metal tubing to eliminate the pressure variations associated with conventional rubber brake lines, guaranteeing maximum braking precision for upper-level system.
An advanced two-channel ABS systems to maximize shivering 750th ABS ‘s an impressive was the level of active and passive safety by preventing wheel lock on the slippery surface and increase braking performance. At 750 ABS shivering, all riders are confident to use the full force of the braking system generous, enhance security on a hard surface not only in a straight line, but in the corner as well.

2010 Aprilia SHIVER 750 ABS speedo

2010 TUONO 1000 R Black

Since it first appeared in the motorcycle scene, the Tuono has embodied Aprilia genius and amazing technical know-how, accumulated through victory after victory in motorcycle racing. The Tuono has come means more than talent and technology will be another road bike.
The fact is that the Tuono only unique. Not just another naked, the Tuono Superbike 1000 cc. Only gifts that have been removed, and the handlebars raised for maximum control. The Tuono has exceeded all expectations. This has proved unbeatable as a road bike, and the Factory version has been invincible on the racetrack, literally dominating the Italian racing nude scenes. Not satisfied with success at home, Aprilia Tuono also carry the flag in the international racing scene, achieving prestige in epic races like the Isle of Mann Tourist Trophy, is just one incident in which the Tuono has dared to take the bike production and competition superbikes too. The Tuono is a street fighter with racing in the blood.
The new Tuono 1000 R smooth, powerful, and precise. This class holds all records for motorcycles, and is undoubtedly the leader in the twin cylinder scene. In short, the Tuono 1000 R is the bike that all other nakeds to beat. This is the machine for the demanding motorcyclist, the rider who seeks maximum naked performance, on the road and on track.
With performance beyond the competition, the Tuono 1000 R is the best naked money can buy, with all the performance of Superbike racing for the thrill even the most sophisticated racing driver.
139 HP engine not only gives you more strength to play with, but make the bike more usable on the road as well. Just like the RSV from which derived, the Tuono 1000 R realize the concept of “total ridability” which always characterized the performance Aprilia motorcycles.
Manically proper ergonomics combine with extraordinary control that’s easy to let you build a perfect feeling with the bike when you ride off, and to help you maximize your own potential with the minimum physical and mental effort.
The Aprilia engineers have made improvements that will ensure that the Tuono 1000 R continues to set the pace for high performance nakeds.
Let’s see some major changes.
New · V 60 Magnesium Evolution engine
· Dynamic air intake (only naked with ram air technology)
· Electronic fuel injection system with 57 mm throttle body
· Machinery management unit of 16 bits
· Exhaust system with twin silencers and three way catalytic converter with Lambda probe oxygen sensor
· Perimeter frame Aluminum Alloy
Double banana · aluminum suspension
· Lighter steering yoke

Once again Aprilia has succeeded in producing, fine naked exclusive and unique. Latest Tuono 1000 R remains the most sought after of all naked twins, and the perfect synthesis of exclusive components, quality, technology and finish.
Like RSV, the Tuono has been perfected on track to meet the most demanding and refined motorcyclists. Each individual part has been developed to maximize performance and pleasure ride naked who has become a legend in racing circles.
Engine performance is better than ever. Maximum power is 102 kW (139 HP) at the crank and maximum torque 10.9 kgm at just 8500 rpm. The Aprilia Tuono 1000 R is therefore one of the most powerful of all nakeds.

2010 TUONO 1000 R White

Styling
Bicycles styling is unmistakably Aprilia, and unmistakably Tuono. The 1000 R Tuono maintain close family look with the previous model and the RSV 1000 R from the origin. That’s, newly aggressive nose fairing, with closely mounted twin lights, have been developed in wind tunnel testing to provide effective protection for the rider and to kill lift at high speeds, ensuring maximum precision and control.
The Tuono 1000 R has been designed with performance and comfort in mind. All parts are styled for stunning looks and maximum functionality. The two lateral spoilers, for example, not only looks great but also serve an important aerodynamic purpose. They help keep the bike stable at high speeds and keep the wind from the rider’s legs. This was partly thanks to these spoilers that the Tuono 1000 R aerodynamics provide better protection than the other naked.
The design team has also been trying hard to ensure that, unlike other nakeds, Tuono 1000 R benefits from race-tuned engine breathing. The Tuono 1000 R is the only naked with dynamic air intake located directly under the nose fairing, and channel to channel ram air through the frame to the airbox. Yet more evidence of the soul racing in 1000 without compromising the Tuono R’s!
In 1000 Tuono R, ergonomics is one of the stronger points bike. Seating position has been carefully designed to provide maximum control of the rider on the front end. The addition to the handlebars are lower and the footrests have been moved farther back, thus riding position is sportier and more effective. Nevertheless, the overall comfort and even increased, so the ride is less tiring.
Slender tail with integrated direction indicators is similar to RSV, but the points to increase the dynamic styling Tuono 1000 R’s. Motorbikes can also be quickly changed from double to single seat by an official Aprilia kits (optional).

The V60 Magnesium Evolution engine
Latest 1000 cc V 60 Magnesium Evolution engine from the RSV 1000 R Factory, with only some minor changes to improve torque and muscle at low revs. Machine has been thoroughly redesigned to maintain its reputation as the best twin cylinder engine in production. So performance is more amazing than ever, with power that can be used 100% and, of course, that proverbial Aprilia reliability.
Engine breathing has been improved by the new, larger valves (enlarged 31-33 mm in diameter) and a new exhaust header pipe diameter is greater. Thanks to this increase, the V60 Magnesium Evolution that drives Tuono 1000 R puts more strength than ever, 139 HP at 9500 rpm, while also increasing the torque to an impressive 10.9 kgm at 8500 rpm, a figure that tells you all you need to know about muscle Aprilia’s V twin can provide even at low revs.
The silencers have catalytic converters installed nearer the collector pipes. This solution has reduced converter activation time by 50%, while further reducing the rate of emissions, keeping tem well within the strict limits required for Euro 3 homologation.
optimized fluid dynamics inside the cylinder head has been improved by mapping the refinement of the combined ignition and fuel injection systems to achieve higher power throughout the useful range of rotation.

So let us look at the main characteristics of the new engine V 60 Magnesium Evolution:
· New optimized cylinder heads with larger valves and one spark plug per cylinder
· 57 mm throttle bodies with one injector per cylinder
High Strength conrods ·
· Lighter overall weight thanks to the extensive use of magnesium
· Close-ratio gearbox
· Dry Flood trochoid lubrication with double pump, separate oil tank and oil cooler
· Mixed gear and chain valve timing. Drive gear (one for each timing chain) located inside the crankcase to maintain the cylinder head as small as possible.
· AVDC (Anti Vibration Double countershaft).
· Aprilia’s patented PPC (Pneumatic Power Clutch) hydraulic-operated, power assisted clutch system for controlling rear wheel under the mental slowing

The Tuono 1000 R inherits the RSV’s dynamic air intake, the location was just below the light cluster, in the middle of the bike where ram air pressure is highest. Air Runner duct (which also supports the nose and instrument prize) to the airbox air channels, 10.3 liters designed to allow the engine to develop its full potential. Air ducts Runner ensure that the pressure in the airbox increases with speed, and produces 3% increase in engine power at maximum speed.
Engine control unit developed in conjunction with Siemens VDO provides integrated engine management. ECU receives all essential engine parameters in real time from 15 different sensors, processes the data and, again in real time, controls the various actuators that keep the engine functioning perfectly at all times.
Flash EPROM unit is equipped with mapping for unrestricted racing out ready to load. Aprilia Technical Assistance Service can therefore enable race mapping in next to no time on request.

FRAME
Do you ride on the street or on the track, Tuono 1000 R’s chassis brings you the top performance and control. Every aspect of the frame, suspension fork and have been refined according to the perfect weight distribution. In accordance with Aprilia traditions, the frame is a combination of aluminum-silicon foundry alloys and Peraluman 450 pressed parts. A highly sophisticated structure is not only more rigid than the previous version but lighter too. Latest frame weighs under 10 kg (9650 grams) setting an impressive new record for its class. wheelbase is shorter too, and at 1410 mm – the record for the category – accounts for the Tuono 1000 R rack’s than the handling and more instinctive ride.
The new double banana suspension gives a clear section for exhaust system and weighs only 4860 grams, well under the 5 kg figure considered by experts as a reference weight for this component.

SUSPENSION
fork is a Showa upside down unit, with a 43 mm cage for the perfect balance between precision on the racetrack and comfort on the road. And to ensure that the ideal setup can be achieved for all styles and conditions, on the road and on the same line, the fork is fully adjustable in spring preload and in compression and rebound damping. The Sachs monoshock at the rear is also regulated in spring preload and rebound damping.

TUONO 1000 R Shockbreker

Braking System
Braking system has undergone some major changes. The new Tuono 1000 R is equipped with Brembo radial calipers Gold featuring two separate sintered pads. The two 320 mm floating steel discs feature a narrower braking band to minimize inertia and weight and stay in place by Aprilia exclusive six spoke flange.
rear braking system is Brembo Gold too, with 220 mm stainless steel disc and the caliper with the two 32 mm pistons.
The front and rear brakes both use aeronautical metal braided hoses to eliminate the sponginess definitely associated with conventional brake hoses and to ensure maximum braking precision.

COMPONENTS
What makes the Aprilia Tuono 1000 R stand out from the competition is the care and attention that Aprilia has paid incredible to every small detail. The design team doing the best they have to ensure that every component on the bike to improve performance and functionality, reduce weight and improve the quality and completion.

The following components deserve special attention.
- Dashboard is a unit (digital-analog) mixture. This uses the data received from the CAN line to perform functions essential for autodiagnostic which also has a special memory. New dashboard control unit performs the same function as the previous unit (including the 40 lap timer) but is more compact and modern in design and extremely lightweight. User friendliness has improved too, with all functions controlled from two practical push-buttons on the left hand light switch.

The LED backlighting can also be adjusted to three levels of intensity.
· The cluster light comes from the RSV, and incorporates a four unit visibility for night-time light is perfect.
· The tail light cluster features the new innovative design and LED lighting RSV.
· The key contacts internally code, and the ignition block is equipped with engine immobilizer as standard.

TUONO 1000 R Spedo

2010 Aprilia RS 125 SBK Replica

Aprilia has always been a leader need not in 125 cc Supersports, market segments where Aprilia has pioneered new concepts and sophisticated solutions, and advanced technology which others should strive to follow. Like all Aprilia motorcycles, RS 125 has benefited from the sophisticated technology that has been developed over many years success in GP racing, and quickly transferred to production. For years, 125 hospitals had established a reputation as the standard setter for sports 125′s. Sales success comes naturally too, with the RS 125 topping the sales tables in the main European markets. RS 125 is the inevitable choice of riders entering Sport Production racing. And so, because when the competition gets tough, there are not enough other bikes like Aprilia RS 125. Aprilia RS 125 offers the best young riders in the components and equipment, and technical improvements to an appropriate concentration SupersPort ship.

Here are some key features of the Aprilia RS 125:
• tried and tested yet extremely sophisticated Rotax two stroke engine;
• super-rigid aluminum frame and suspension is derived from extensive experience of Aprilia’s GP;
• inverted fork;
• front brake with radial caliper and four opposed pistons;
• RSV 1000 R style fairing, windshield and tail;
• RSV Factory style, crossed spoke wheels;
• analog / digital instrument panel with multi-functional computer;
• RSV Factory style, forged steering yoke;
• part of oval racing silencer with riveted end plates;

STYLE
means that, cutting edge look of the new RS 125 tells you that this is a professional racing machine. Styling from the RS, like that of all Aprilia sports bikes is the result of exhaustive research aerodynamics.
fairing, for example, perfected by extensive wind tunnel testing, to ensure a great wind protection and minimum drag for maximum racetrack efficiency. The fairing, windshield and tail not only look mean and aggressive, but it enables hospitals to achieve a top speed of 125 bright, eliminating all turbulence around the rider and allows human and machine become one.
The latest generation twin halogen lights also add a view that the mean of 125 new hospitals, and provide a high energy beam of light to improve visibility and safety at night. Slender tails exactly like the tail of the Grand Prix racer. Thanks to the efforts put into the RS 125 tail design, even the passenger seat does not interfere with the bike’s impeccable lines.
Wheels across the speech is not only lighter and more stylish, but safer and more reliable as well.

ENGINE
Cylinder powerful but reliable, one, two stroke, Rotax-Aprilia engine needs no introduction. Over the years, has won a reputation for being unbeatable on the track and dependable on the road.
Still today, this machine offers a technical solution to the state-of-the-art for two strokes, including a stick crankcase intake valves, liquid cooling, an anti-vibration counterbalance shaft, and an automatic mixing system. RS 125 engine has been constantly updated over the years to remain in line with the laws of the latest emission control without a punishing performance. A catalytic converter and precision carburizing Aprilia has won a single cylinder two stroke homologation Euro 3 standards. And the amazing thing is that this has been achieved without losing out on performance: the Aprilia RS 125 engine remains the reference point for all 125 cc powerplants.

CHASSIS
Without a doubt, the most advanced components in the RS 125 is its frame. Developed from extensive experience in GP racing Aprilia 125, RS 125 frame is made of cast aluminum alloy with cross-ribbing reinforcement. Although very light weight, advanced structures achieve exceptional torsional rigidity, setting standards for Aprilia’s competitors.
Part of the box, aluminum alloy suspension has the highest torsional rigidity of all production 125 cc swingarms. Differential side members enable the exhaust to follow the path that maximizes engine performance and enables more acute angles of lean to be achieved in the corner without risking dangerous contact with the asphalt.
Suspension also plays an important role in ensuring not only the RS 125′s performance, but also the safety and comfort. RS 125 can rely on an upside-down fork that has been optimized for maximum performance on the racetrack as well as providing a more satisfying travel on public roads.
Linkage rear suspension features rising rate based on Aprilia 125 GP racing technology, for excellent traction and exceptional comfort even over uneven road surfaces. The hydraulic monoshock that provides the damping for the suspension is also adjustable spring preload.

2010 Aprilia RS 125 White

Brake
Like motorcycles SupersPort respect ourselves, RS 125 should have the best when it comes to components. Is the best braking system available, and designed for maximum efficiency in conditions of increased competitive. Front brake is a state-genuine-the-art, high performance system with a radial caliper and four opposed pistons. In addition to 320-mm front disc, the system also incorporates a radial master cylinder and aeronautical hoses maximum precision and braking power are unmatched. Rear disc diameter of 220 mm and is also equipped with a metal braid hoses perfect balance, high-performance braking.

EQUIPMENT
Aprilia 125 hospitals are packed with prestige components. Compact and lightweight impressive, instruments that include an analog rev counter and a multifunctional digital display with on-board computer that can be operated from handlebar. The speedometer, rev counter, coolant temperature gauge and an exclusive racing chronometer puts you in total control. On-board computer even has provisions to interface with optical finishing systems used at racetracks.

Aprilia RS 125 can mark the start of a beautiful friendship between young drivers and bicycle SupersPort generally as a small explosion of two-stroke has everything needed to make one fall in love with the rapid acceleration and sharp handling, all the user-friendly manner and to customer- MSRP $ 5.499-friendly.

2010 Aprilia RS 125 Black

SPECIFICATIONS

• Engine: Liquid cooled, single cylinder two stroke. Aluminium cylinder with Nikasil coated liner. Read valve intake. Separate lubrication. Homologated to Euro 3 standards.
• Fuel: Dell’Orto VHST 28
• Bore x Stroke: 54 x 54,5 mm
• Total displacement: 124,8 cc
• Compression ratio: 12,5 ± 0,5:1
• Fuel system: Dell’Orto VHST 28.
• Ignition: Electronic CDI ignition.
• Starting: Electric
• Generator: 12V – 180 W
• Lubrification: Separate mixing with variable displacement, volumetric pump.
• Gear box: 6 speed. 1st 10/30 (0.33) 2nd 14/29 (0.48) 3rd 17/27 (0.63) 4th 19/25 (0.76) 5th 21/24 (0.87) 6th 22/23 (0.67)
• Clutch: Multi-plate in oil bath.
• Primary drive: Gearbox: 63/19 (3.31).
• Final drive: Chain: 17/40 (2.35).
• Frame: Sloping twin-spar frame in thin wall box section cast aluminium, with reinforcement cross-ribbing.
• Front suspension: Upside down hydraulic fork, Ø 40 mm. Wheel travel 120 mm.
• Rear suspension: Swingarm with asymmetric members in thin wall box section cast aluminium. Hydraulic monoshock with adjustable spring preload. Wheel travel 120 mm.
• Brakes: Front: Floating Ø 320 mm disc. Radial caliper with four differential diameter pistons, Ø 32 mm – Ø 27 mm. Rear: Single Ø 220 mm disc. Caliper with two Ø 30 mm pistons.
• Wheels: Aluminium alloy. Front 3.00 x 17”; rear 4,00 x 17”.
• Tyres: Tubeless radial. Front 110/70 17”; rear 150/60 17”.
• Dimensions: Overall length 1955 mm Overall width (at handlebars) 720 mm Overall height (at windshield) 1100 mm Seat height 805 mm Wheelbase 1345 mm
• Fuel tank capacity: 14 litres (3.5 litre reserve).
• Carburettor: The 21 kW RS 125 (sold on the German market) is still equipped with a Dell’Orto PHBH 28 carburettor and is homologated to Euro 2 standard.

2010 Aprilia RS 125 Speedo

2010 Aprilia RX 125 Left

Aprilia carry on their latest production and SuperMoto 125cc Enduro models, the SX 125 and RX 125, in the year 2010. Today is nothing new in the lineup, but it improved radically, the model announced a new kind of pleasant good at dirt tracks to be paved with opportunity and revised last year. Now, we get a chance to swing leg over each model and could not be more impressed, considering the category. That can not be avoided innovative SXV and RXV would extend the influence of others on their members Aprilia range sooner or later. The world beating styling, performance and engine technology that has generated this fantastic family of off-road Motorcycles an attractive and modern. SX 125 and RX 125 is the latest off-road machines from Aprilia. Specialists and subtle, that they want is a clear choice for young riders want prominent WHO since the beginning. The SX and RX is built to provide both total rider satisfaction. Although essentially the same technology, has been adapted to suit different specializations. Shares of The SX and RX are the same body, frame, engine and suspension but it has a different character was very different for Passions.
With 17 companies “Wheels and Tires sports, SX is the obvious candidate for the prize of the meanest 125 over mixed routes and cold. Lightweight, SX give the bike a very big”performance without exceeding power limits are determined by law. Enhanced Its engine enables agile You never come down.
SX and RX 125 share a family Aprilia Also clearly visible, apparently inspired by my older brother on their larger, the engine has established a new trend in off-road design.

2010 Aprilia RX 125

STYLING
Aprilia was the first manufacturer to introduce dramatic innovations to the designs of essential enduro and motard motorcycles. In the same way in which the RXV and SXV have become style icons in their own right, the SX and RX are destined to leave their mark on young off-road riders.
As with all off road motorcycles worthy of respect, the SX and RX are built for maximum functionality and efficient riding and control. Their styling leaves no room for pointless frills and gadgets. The unmistakably pure lines of the SX and RX are simply unique among off-roaders.

2010 Aprilia RX 125 Speedo

INSTRUMENTATION
To confirm its determination to build advanced motorcycles that are versatile and practical in everyday use, Aprilia has equipped the RX and SX with sophisticated digital instruments just like those on the bigger SXV and RXV.
Once again Aprilia motorcycles are going to feature in the dreams of young riders.

SPECIFICATIONS

• Engine: Rotax 122 single cylinder 2-stroke. Aluminium cylinder with Nikasil liner.
• Fuel: Unleaded petrol.
• Bore x Stroke: 54mm 54,5mm
• Total displacement: 124,8cc
• Compression ratio: 12,5:1
• Maximum power at the crank: 11 kW and 16 kW.
• Maximum torque at the crank: 12.2 Nm @ 8000 rpm (11 kW); 16 Nm @ 9750 rpm (16 kW).
• Fuel system: Dell’Orto VHST 28 carburettor.
• Ignition: Electronic CDI ignition.
• Starting: Kick start.
• Generator: 12V-180W
• Lubrification: Separate mixing with variable displacement, volumetric pump.
• Gear box: 6 speed. Ratios 1st 10/30 2nd 14/29 3rd 17/27 4th 19/25 5th 21/23 6th 22/21
• Clutch: Multi-plate wet clutch.
• Primary drive: Helical gears. Ratio: 19/63.
• Final drive: Chain. Z 16 gearbox pinion, Z 45 rear wheel sprocket (11 kW); Z 15 gearbox pinion, Z 45 rear wheel sprocket (16 kW)
• Frame: High strength steel frame with double trellis beam and double cradle. Detachable seat frame.
• Front suspension: 40 mm upside down hydraulic fork. Wheel travel 260 mm.
• Rear suspension: Steel swingarm. Hydraulic monoshock with piggy back cylinder. Wheel travel 270 mm.
• Brakes: Front brake 260 mm disc. Floating caliper with two parallel pistons. Rear brake 220 mm disc. Floating caliper with single piston.
• Wheels: Front wheel Aluminium, 1.6×21”. Rear wheel Aluminium, 2.15×18”.
• Tyres: Front tyre Pirelli MT21, 90/90×21”. Rear tyre Pirelli MT21, 120/90×18”.
• Dimensions: Overall length 2,255 mm. Overall width (at brake levers) 850 mm. Overall height (at mirrors) 1,415 mm. Seat height 925 mm. Wheelbase 1,480 mm.
• Dry weight: 116Kg
• Fuel tank capacity: 10 litres (including 1.3 litres reserve).
• Cooling: Liquid cooled.
• Intake: Lamellare
• Maximum speed: 115 kph (11 kW); 120 kph (16 kW).
• Emissions: Euro 3 (11 kW and 16 kW).
• Other: Other characteristics Essential multifunctional instrument panel. Colour schemes Off White

2010 Aprilia RX 125 Front

Aprilia RXV 450-550 Right

Aprilia RXV 4.5 – 5.5 was a revolutionary engine for this class, 77-degree V-twin gets even better as an Aprilia to develop a new fuel system which displays the stepper motor throttle body and ECU control of the new. These changes will not only lose weight, and implicitly makes RXV more competitive, but also ensures fatigue-free start for cold mornings. Other additions have much to do with engine performance is a new lateral muffler system, which is the closest thing you get one race. USA model features an under seat twin exhaust outlets.

2010 Aprilia rxv-4.4-5.5

After repair the machine (to make better performance and lightness that), this chassis is to suffer the same treatment. Lighter rear frame is now offering lower seating position (5 mm lower, exactly), perfect for average size riders. Because the ergonomics have been changed to comfort, the bike also got a new chair.
Also at the rear, the new suspension makes no exception for carrying a body cast and the members of the hydroformed at the scene. Besides reducing weight, this makes the suspension of new, more flexible, keeping the rear wheels on the ground more than in the air and that can only mean better lap times.
Together with a lighter and more compact rear brake caliper, decreasing the overall weight is 2 kg.

The Aprilia RXV 4.5 to 5.5 is a true demonstration of power from the street because there are continuous improvements being made for this bike so that remains indisputable leader of his class. Also, because of the style and ingenious construction methods applied, RXV also a good way to be introduced by the Italian machine, now conquered every single bike category.

2010 aprilia rxv-4.4-5.5

SPECIFICATIONS

• Engine: 77° V twin four stroke. Liquid cooled. Single overhead cam with rocker operated exhaust valves, chain timing drive. 4 valve heads with titanium valves.
• Fuel: Lead-free petrol.
• Fuel system: Integrated electronic engine management system controlling ignition and fuel injection, with two power mappings. Throttle body: 38 mm (40 mm).
• Ignition: Electronic.
• Starting: Electric starting.
• Exhaust: Euro 3 lateral exhaust. Conforms to FIM regulations for 2009.
• Generator: 340 W
• Lubrification: Dry sump with external oil tank. Separate gearbox lubrication.
• Gear box: 5 speed. Enduro gear ratios: 1st 12/31 2nd 13/25 3rd 15/23 4th 19/24 5th 21/22
• Clutch: Cable operated multi-plate wet clutch.
• Primary drive: Spur gears. Transmission ratio: 22/56.
• Final drive: Chain. Transmission ratio: 15/50 (Z14 sprocket supplied).
• Frame: Chrome-molybdenum steel perimeter frame with aluminium alloy vertical members. Steering head (rake) angle 27°. Lightweight rear frame.
• Front suspension: Ø 45 mm upside down fork with two adjustments.
• Rear suspension: Aluminium swingarm with cast body and hydroformed members. Hydraulic monoshock with compression and rebound adjustment.
• Brakes: Front: Ø 270 mm floating disc in stainless steel with aluminium flange. Nissin floating caliper. Rear: ? 240 mm stainless steel disc with floating caliper.
• Wheels: Black anodised aluminium alloy. Front: 1.60 x 21” Rear: 2.15 x 18”
• Tyres: Front: Metzeler 90/90 x 21” Rear: Metzeler 140/80 x 18”
• Dimensions: Overall length: 2,222 mm Overall width: 800 mm Ground clearance: 396 mm Seat height: 941 mm Wheelbase: 1,495 mm
• Fuel tank capacity: Capacity 7.8 litres

2010 aprilia rxv-4.4-5.5 engine

2010 Aprilia RSV4 White

Aprilia RSV4, the street version of the bike which has taken Max Biaggi and Team Aprilia Alitalia to the top of the World Superbike Championship, was voted “Bike of the Year 2010″ by the readers of the monthly magazine “Motociclismo”.

At the conclusion of a widespread survey which involved more than 33,000 readers of the magazine – the most authoritative and historical specialised Italian periodical, founded in 1914 – Aprilia RSV4 R was awarded both the recognition of “Sport Bike of the Year”, beating out its rivals, the BMW S 1000 RR and the Ducati 1198 S, as well as, and above all, the title of “Bike of the Year 2010″ which elects it as the absolute monarch of the “Motociclismo” readers’ preferences.

The awards ceremony which took place yesterday evening at the Edisport headquarters held many other satisfactions in store for Aprilia and the Piaggio Group with further category victories and various placings for the Group’s motorcycles and scooters.

In fact, Aprilia won the title of “Bike of the Year” in the 50cc category (with Aprilia RS, which has always been a winner in this category), 125cc (with the larger engine version of the Aprilia RS, in this case also a consistent winner in its class), and Enduro with the Aprilia RXV 4.5/5.5. Second place went to the Aprilia Dorsoduro Factory 750cc in the Supermotard category.

To the Vespa GTS 300 once again this year went the absolute victory for mid-size scooters, while for the over 300cc scooters another two of the Group’s vehicles, the Gilera GP800 and the Piaggio Mp3 400 placed 2nd and 3rd. Also, in the “little 50′s” group the reader’s voted the Vespa 50 S as their second favourite.

Two awards also went to the Moto Guzzi brand yesterday evening: in fact, the “Motociclismo” readers gave the Moto Guzzi Norge 1200 8V 2nd place in the Grand Tourer bike category and third place in the Cruiser category to the California 1100 Vintage.

Aprilia RSV4 is the result of a technologically state-of-the-art project developed entirely by Aprilia. With 36 championship titles win in World Bikes – thanks to an impressive record of 275 victories in the G.P. speed championship – to which another 7 world titles in off road are added, Aprilia is without question the top winner among Italian and European manufacturers today in world championships.

The extraordinary V4 1,000cc engine and the “racing” style of the Aprilia RSV4 have immediately become the new reference point for the sector. The RSV4 already astonished the competitive world at the beginning of the season, earning 9 podiums in 2009 and its first victory on the track at Brno with Max Biaggi. But above all it places itself as a key player in the 2010 championship in which the Team Aprilia-Alitalia RSV4 has already achieved two spectacular double wins, ridden to victory by Biaggi in both races of the Portugal Gran Prix on the Portimao track and the Italy Gran Prix on the legendary Monza Autodrome where Max Biaggi broke – for the first time in the world of Superbike – the “barrier” of 330 kilometres per hour. ( from www.aprilia.com)

2010 Aprilia RSV4R Black

SPECIFICATIONS

• Engine: Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder
• Fuel: Unleaded fuel
• Bore x Stroke: 78 x 52.3 mm
• Total displacement: 999.6 cc
• Compression ratio: 13:1
• Maximum power at the crank: 180 CV (132,4 kW) a 12.500 rpm
• Maximum torque at the crank: 115 Nm a 10.000 rpm
• Fuel system: Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
• Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil”-type coils
• Starting: Electric
• Exhaust: 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)
• Generator: Flywheel mounted 420W alternator with rare earth magnets
• Lubrification: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
• Gear box: 6-speed cassette type gearbox 1st: 39/15 (2.6) 2nd: 33/16 (2,063) 3rd: 34/20 (1.7) 4th: 32/22 (1,455) 5th: 34/26 (1,308) 6th: 33/27 (1,222)
• Clutch: Multiplate wet clutch with mechanical slipper system
• Primary drive: Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
• Final drive: Chain: Drive ratio: 40/16 (2.5) or 42/16 (2.625)
• Frame: Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper
• Front suspension: Upside-down Showa fork with Ø 43 mm stanchions. Forged aluminium radial calliper mounting brackets. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm
• Rear suspension: Twin sided aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload, wheelbase, hydraulic compression and rebound damping. APS progressive linkage. Wheel travel 130mm
• Brakes: Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 Ø 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose Rear: 220-mm diameter disc; Brembo calliper with two Ø 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose
• Wheels: Front: Aluminium alloy with 6 split spokes, 3.5”X17” Rear: Aluminium alloy with 5 split spokes, 6”X17”
• Tyres: Radial tubeless. Front: 120/70 ZR 17 Rear: 190/55 ZR 17 (alternative: 190/50 ZR 17)
• Dimensions: Max. length: 2040 mm Max. width: 735 mm (at the handlebar) Max. height: 1120 mm Min. height from the ground: 130 mm Saddle height: 845 mm Centre to centre distance: 1420 mm Trail: 105 mm Steering angle: 24.5°
• Dry weight: 184 kg *
• Fuel tank capacity: 17 litres (4-litre reserve included)
• Other: * Kerb weight, without battery and fluids.

2010 Aprilia RSV4R

A revolutionary project and the unique history of racetrack wins have come together to create the RSV4. A truly SupersPort with exclusive racing technology, developed around the V 4-cylinder engine developed from a narrow technical knowledge which led to his Aprilia to victory at racetracks around the world. Aprilia RSV4 horse racing hits and a walk with only one purpose: to win.

33 championships, 254 MotoGP World Championship wins and 8 Superbike victories: over the last two decades Aprilia motorcycles have become modern legends. Noale dominate track bike from around the world thanks to the friendly design, exceptional courage and ability of the technicians who pursue innovative solutions through the experiment, innovation and sometimes seems to revolutionize the technical scheme has not changed. Factory Aprilia RSV4, the bike is brought back to Aprilia 2009 Superbike World Championship, is a great product is very technical know-how. This is a very technologically advanced motorcycles, conceived for racing and for this purpose was designed and developed by Aprilia together with the marque’s Race Division, the largest and most advanced of its kind in Europe and one of the most important in the world.

Aprilia RSV4 Factory is a racing machine, in keeping with Aprilia traditions, actually follow an innovative approach in the design and construction. Its narrow V engine, the use of state-the-art electronics, plus extreme lightweight and compactness of only a few features that make it unique in the world. Aprilia RSV4 Factory is designed and built with the same philosophy with the division race Aprilia. This is why the RSV4 Factory is the most ‘complete’ Superbike racing replica, ready for those who want to venture into the track with a leading motorcycle.

Aprilia RSV4 Factory engine is the most innovative and powerful ever built. This is a super compact 999.6 cc 65 ° V-four cylinder engine is designed for maximum power (180 CV), in which the powerplant engineering come together with the best materials and most advanced solutions to electronic controls. Aprilia’s engine, in fact, using Multimap technology Ride Wire, a solution that opens new limits for engine management, with practically unlimited possibilities for further development.
In addition to the triple map Ride by Wire system, a sophisticated electronic injection system with two injectors and high channel adjusted installed.

Aprilia RSV4 Factory is absolutely SupersPort motorcycles, bicycles most complete available in the market for bicycle enthusiasts, and the chassis that confirms this: designed for the racetrack, he has a unique adjustment feature motorcycle racing. Set chassis geometry allows parameters such as the position and inclination headstock, pin height suspension and even machines that will be changed. Construction technology is also derived motor sports: Factory chassis and suspension RSV4 molds made of aluminum with variable section and pressing.
A component is a state-of-the-art technology in a motorcycle: Öhlins Racing fork, rear monoshock and steering damper meters, Brembo monobloc calipers, forged aluminum rims.

Aprilia RSV4 Factory is a new benchmark in the Superbike road sector law. Unique characteristics of the bike is listed as follows:
- Compact, innovative design
- New – and unique – 65 ° V-four cylinder engine
- Multi-adjustable aluminum alloy frame perimetral
- Adjustable relative position within the frame of the machine
- Asymmetric aluminum suspension
- Fully adjustable Ohlins racing fork and monoshock rear.

DESIGN. Searching for compactness end
Creating a bicycle, the most compact SupersPort innovative and beautiful at the market: a tough challenge and interesting to Aprilia’s style department! This is how the RSV4 Factory is created, the motorcycle that determines the new performance standards and horseback while opening new horizons in the design of ultra-sport motorcycles. Just a few simple styling elements and a special highlight rather than hide certain technical features of the Aprilia RSV4 Factory. Its frame and engine stood as an essential element of the design of the motorcycle.

In line with Aprilia traditions, RSV4 Factory design focuses not only on appearance but serving the technology and performance. Every detail has been prepared not only to be unique and beautiful, but also and above all to be efficient.

Needs food intake system is optimized dynamically assigned V4 front strong-charactered, with extra large air intakes that are not only developed a large overpressure in the airbox (around 35 MB @ 280 km / h), but also completely separates the light from the bottom of the fairing . This causes the style is truly unique, never seen before in a motorcycle sports. RSV4 Factory display genuine, technology, and definitely more aggressive. The triple headlamp Aprilia maxi sportsbike quoting the original, that RSV that set new standards for the twin sport in 1998.

Smaller, lower and narrower than the 4 cylinder motors before, compact extreme RSV4 Factory is a strength, along with almost obsessive pursuit of the perfect ergonomics (very important for the control of the perfect horse riding), which always distinguished Aprilia road and dominated the World Championships motorcycles.
In-depth research, aerodynamic surface is minimized without sacrificing motor Class-leading aerodynamics. The fairing, tail spectacular ultra-compact is one of the most prominent features of this motor. The stunning LED taillights join the tail, offering excellent luminosity. Even the back of the RSV4 Factory is perfectly clear.

ENGINE. An exclusive 65 ° V4
Pursue maximum performance motorcycle engine in SupersPort must be accompanied by a perfect engine is positioned in the frame. Mass centralization, the length of suspension and optimum weight distribution is material to achieve the most competitive bike, along with the pursuit of maximum power and perfect power delivery.

Aprilia engineers have long known that a narrow V layout engine is an ideal technical solution for obtaining a class-beating chassis architecture that emphasizes performance of the machine. It is no coincidence that the RSV 1000 twins, was launched in 1998, is still universally recognized as a sport bike with the best chassis ever. Even some of the winners of the RSA 250 GP bike (5 wins world championship final in three seasons), produced by the division race with engine Aprilia V. Aprilia able to draw from the extensive expertise acquired in the year unchallenged supremacy in the Motorcycle World Championship, then, when the time comes to determine the new Superbike, after evaluating all possible solutions, a narrow V engine selected. A 65 ° V-four cylinder engine, the only solution that can ensure unparalleled performance, outstanding chassis enabling architecture that has defined all Aprilia motorcycles racing over the last twenty years.
In addition to exclusive configuration that makes 65 ° V4 unique in the world, Aprilia’s technical advantages of four-cylinder engine can be summarized as follows:
- Perfectly integrated into the frame, with optimum mass centralization and the inertia is minimized for agility benchmark.
- Absolute slenderness, the overall width is proportional to the twin-cylinder motorcycle, with a big advantage in terms of ergonomics and aerodynamics.
- The compactness of the layout cylinder engine makes a very oversquare possible, use a large hole and then a larger valves, helps the engine breathe more freely and achieve a higher engine speed (14,000 rpm can be used).

Engine developed entirely by Aprilia Research and Development Division, which aims to offer a record of performance and reliability and ridability in accordance with strict quality standards.
Aprilia’s V4 design exploited the calculation of the most powerful programs currently available in the market, so that in the layout engine that performs optimally. With a bit of open angle V (against the machine V 60 °), the designers can use a larger space to optimize the inlet channel and maximize engine efficiency. RSV4 machine has a fluid dynamics class-leading attributes that have a narrow V engine can match.

System of a unique time to make the head is very compact as possible (measuring only 250 mm high at the back), especially in areas under SPAR frame, which is so much narrower than would be possible. Lateral timing chain drives the intake camshaft only and follows the path optimized to improve the timeliness and chain durability.

A pair of teeth in the middle of the cylinder bank transmits drive to the exhaust camshaft. This solution allows to obtain a very compact head in the exhaust. V4 is even more compact than the twin V60 Magnesium is mounted on the RSV 1000 R.
A vibration damping countershaft more than in 90 ° V engine. monobloc crankcase is the configuration with integrated cylinder liners for maximum rigidity and consistent performance.

Future Electronics
Aprilia RSV4 Factory engine’s full-featured Ride by Wire technology. There is no direct relationship between throttle grip and throttle valve, which is really controlled by a new generation Marelli control unit.
Every bank has a special unit moved the throttle servo only two relevant bodies. Therefore, the two banks, and then the amount of fuel injection, can be managed independently. Temporary solutions have been tried and tested by Aprilia, had never previously applied in such a powerful engine, thus opening practically infinite possibilities for setting transmission power. This technology benefits motorists soon, thanks to triple mapping that can be directly controlled from the handlebar, the machine can change the delivery mode and thus the motor all the time temperament.

Fuel supply to use two injectors per cylinder: single injector is placed downstream of the throttle valve and the “bath” injector placed in the airbox and began working at high load and revs. Technological advantage V4 engine is equipped with electronically controlled variable intake tract length. At low revs and load, torque favors long lines and smooth power delivery. When top-level performance is required, the top of the intake canal to improve endurance time to leave the engine duct and free to express their full power potential. A butterfly valve in the exhaust further optimizes power delivery.

The transmission was also designed in accordance with the criteria of the most advanced. To underscore the soul racing V4 engine, a used cassette gearbox with wet multiplate clutch discs are equipped with flip-machine system to optimize the mechanical braking torque and to ensure stability under hard braking.
Finally, to minimize weight, the new Aprilia engine that utilizes a large ultralight materials; valve cover and all the external housing made of magnesium.

V4 engine in brief:
Engine capacity: 999.6 cc
Architecture: 65 ° V4
Power: 180 HP (132.4 kW) to 12 500 rpm
Crankcase: monobloc with integrated cylinder liners
System Time: 4 valves per cylinder (titanium and Nymonic) is operated directly by the camshaft is driven by mixed chain / gear systems (lateral timing chain, gear train central)
Fuel system: Magneti Marelli electronic injection with two injectors per cylinder and integrated independent Ride by Wire system for each bank. Three selected from handlebar mapping. Electronic controlled variable length intake tract
Antivibration countershaft
Maximum rpm: 14 100 rpm
Compression ratio: 13:01
Transmission: six-speed cassette gearbox-direct control
Clutch: mechanical multiplate clutch with slipper system
Exhaust system: 4 into 2 into 1 headers with oxygen sensor and a single silencer with integrated catalytic converter and butterfly valves.

CHASSIS. Aprilia’s entire racing know-how
A unique, such as Aprilia V4 engine could do nothing but combined with exceptional chassis that emphasizes the uniqueness of this bike. Year of race and the victory at the top level to melt into racing Aprilia chassis is carried out by research and development department, with the construction and customization solution that only a prototype racing can boast.
RSV4 Factory reap the rewards all Aprilia’s racing experience.

Perfect centralized mass is mandatory when a frame RSV4 Factory is being developed. All designed to achieve the best results, start from a position of the tank (it is important to increase) with most of the fuel under the saddle in order to optimize the balance of bike riding and eliminate the difference between a full tank and empty.
There is no doubt: Aprilia RSV4 Factory is a track-ready bike right, and a front / rear weight distribution of 52/48 confirmed this.

Frame
In line with Aprilia traditions of racial division, the structure of castings and pressings RSV4 using a welded aluminum frame to create a far more rigid than twin RSV 1000, which was a benchmark. In particular, torsional and flexural stiffness are optimized to provide perfect sense and control and the ability to handle high power output such as Superbike version.

Suspension
The Öhlins Racing fork has a 43-mm inverted cage and titanium nitride coated to minimize friction. Wheel travel is 120 mm. As in the motorcycle race, enabling precision adjustments to the fork compression and rebound damping and hydraulic spring preload.
The Öhlins Racing rear shock absorber is equipped with a can of “Piggy Back” nitrogen and can be adjusted with spring preload, compression and rebound damping and length, allowing the height of the rear of the bike that will be changed to adjust the set-up with a different riding style and track . Wheel travel is 130 mm.
This bike also comes with steering damper Öhlins racing adjusted.

Brake
Front of the system without the slightest doubt the best system available on the market. Brembo monobloc radial calipers are state-of-the-art in racing brake systems thanks to their power, high modulability and resilience.
Dual disc diameter of 320 mm stainless steel floating completely new and has been developed by Aprilia specially for this bike. A rotor with reduced height and asymmetrical perforation is used, so that increased braking power and front wheel to be lightened by about 500 grams. The followers of floating is the key to the flange with a 6 pin only to minimize inertia and weight.
Radial brake pump is a type of lever to improve the feel and accuracy of response. rear braking system is Brembo “Serie Oro” with a disc diameter of 220 mm stainless steel and two-piston caliper, with a racing-type pump and tank integrated.

Rims
Search for lighting a greater cause implementation of the new forged aluminum rims. Original design further weight loss (about 1 kg less than 1000 twin RSV) which, together with new brake discs, minimize unsprung mass and rotating inertia mass, favorable response motorcycles.

Component
A Superbike is really special not only as far as performance is concerned but also for the treatment of it was built with. Regarding the RSV4 Factory, said the details of everything: there are races other “ready” motorcycle ever built with such care. Attention is paid to the construction not only meets the desire for beauty (motorcycle built like RSV4 Factory in beautiful cases), but almost all aim to achieve the goal: to win. This is why every detail thought to improve the performance and functionality, reduce weight and greatly improve product quality and finish.

SPECIFICATIONS

• Engine: Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder
• Fuel: Unleaded gasoline
• Bore x Stroke: 78 x 52.3 mm
• Total displacement: 999.6 cc
• Compression ratio: 13:1
• Maximum power at the crank: 180 CV (132,4 kW) a 12.500 rpm
• Maximum torque at the crank: 115 Nm a 10.000 rpm
• Fuel system: Airbox with front dynamic air intakes. Variable length intake ducts controlled via ECU. 4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion Track Sport Road
• Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil”-type coils
• Starting: Electric
• Exhaust: system 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)
• Generator: Flywheel mounted 420W alternator with rare earth magnets
• Lubrification: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
• Gear box: 6-speed cassette type gearbox 1st: 39/15 (2.6) 2nd: 33/16 (2,063) 3rd: 34/20 (1.7) 4th: 32/22 (1,455) 5th: 34/26 (1,308) 6th: 33/27 (1,222)
• Clutch: Multi-disc oil-bath, with mechanical slipper system
• Primary drive: Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)
• Final drive: Chain: Drive ratio: 40/16 (2,5)
• Frame: Twin-spar adjustable aluminium frame, with castings and pressings. Envisaged adjustments: • headstock position and rake • engine height • swingarm pin height Öhlins adjustable steering dumper
• Front suspension: Öhlins Racing upside-down fork, 43-mm stanchions (with Tin surface treatment). Low profile forged aluminium radial caliper mountings. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm
• Rear suspension: Twin sided aluminium swingarm; mixed low thickness and sheet casting technology. Öhlins Racing monoshock with piggyback with completely adjustable: spring preload, wheelbase and hydraulic compression and rebound damping. APS progressive linkages. Wheel travel: 130 mm
• Brakes: Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose. Rear: 220-mm diameter disc; Brembo floating caliper with two 32-mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose.
• Wheels: Aprilia forged aluminium alloy rims, completely machined, 5 split spokes. Front:3.5”X17” Rear: 6”X17”
• Tyres: Radial tubeless. Front: 120/70 ZR 17 Rear: 190/55 ZR 17 (alternative: 190/50 ZR 17)
• Dimensions: (default settings) Max. length: 2040 mm Max. width: 735 mm (at the handlebar) Max. height: 1120 mm Min. height from the ground: 130 mm Saddle height: 845 mm Centre to centre distance: 1420 mm Trail: 105 mm Steering angle: 24.5°
• Dry weight: 179 kg *
• Fuel tank capacity: 17 litres (4-litre reserve included)
• Other: *Dry weight, without battery and fluids.